Flip book element
A-15700 Peristaltic Polymer Makedown System
The Atlantis Technologies A-15700 Peristaltic Polymer Makedown System is a compact polymer feed system that can be constructed in various pump configurations.
The system is contained within a custom-built HDPE stand and is fully assembled and tested at our manufacturing facility.
A-15400 LPB Progressive Cavity Polymer Makedown System
The Atlantis Technologies A-15400-XXX-PXXX Progressive Cavity Polymer Makedown System is a compact polymer feed system that can be constructed in multiple configurations to allow for varying capacities with a Sydex progressive cavity pump. This model features 4 sizes at a max neat polymer output of 0.6, 1.5, 6.0, and 12 gph.
The system is contained within a custom-built HDPE stand and is fully assembled and tested at our manufacturing facility.
A-15600-PS Atlantis Power Supply
The Atlantis Power Supply has been specifically designed to be the interface between a Keyence Ultrasonic Clamp-On Flow Meter and a Walchem I6 or I9 controller or directly to various chemical metering pumps. The board can also be used for various other sensors where 24VDC power is required. The selectable Relay or Pulse output mode allows the device to operate as a flow switch or a pulse output flow meter. The 4-20mA output of the sensor is also passed through to output terminals for easy connection to a controller or pump.
Brochure
Manual
Electrical Drawings for Pump Connections
Electrical Drawing for W600 Pulse Input
A-15000 Sydex Progressive Cavity Pump Systems
The following Sydex progressive cavity pumps have no check valves to plug. They feature a 316 stainless steel body and rotor with Viton stator and varying sizes of an inlet and outlet. They include a Marathon Inverter Duty Washdown 1/4 HP AC motor driven by an AC Tech Variable Frequency Drive that can accept a 4-20mA remote speed signal. Excellent at feeding polymers, anything smaller than 1/4” can pass through the pump without plugging. These pumps can generate 100 PSI and can be produced in many sizes. Listed below are the most common.
A-15500 EM Polymer Makedown System
The Atlantis Technologies EM Series (A-155500) Polymer Makedown Systems are some of the most popular products we offer. These systems include a solution-aging tank to get the most efficient use of your polymer. Each system is sold as a complete unit with the exception of the solution feed pump, which must be sized and ordered separately for each application.
Four different sizes are currently offered, each with varying available configurations.
General BrochureEM-20 BrochureEM-40 BrochureEM-90 BrochureEM-185 Brochure
Manual
Electrical Drawing
CAD Drawing
A-15600 MDS Polymer Makedown System
The Atlantis Technologies MDS Polymer Makedown System is a compact polymer feed system that can be constructed in various pump configurations including 2.3, 4.0, and 8.0 GPH.
The system is contained within a custom-built HDPE stand and is fully assembled and tested at our manufacturing facility.
Create a Flip Book for any product category. You can also select custom posts.